How to Make a Net

Hose clip
Broomstick handle
1/8 gauge wire
Muslin material
Sheer curtain material
Exact-o knife

Cut broomstick in half to have two handles.
With exact-o knife, cut grooves in side of top part of the broomstick for the wire to snuggly fit into place.
Bend wire into a circle to have a frame for your net, and fold ends down to a 90 degree angle.
With a piece of muslin cut to 22x36, fold in half long ways and cut material to have:
  At the top, 18 inches across and 4 inches down
  At the bottom, 11 inches across
  In the middle, diagonally cut from the top portion to the bottom
With a piece of curtain sheer cut to 22x14, fold in half short ways and cut material to be:
At the top, 11 inches across
Gradually cut to the bottom to form the letter u
Sew the smaller edge of the muslin to the bigger edge of sheer material.
Sew the open end of the materials together
Fold the top portion of the muslin two times, approximately 2 inches for each fold, to make casing for the wire
Sew the final opening areas
Feed the wire through the net and place the ends of the wire in their proper grooves and clamp with the hose clip.